Home
Videos uploaded by user “Brandon Lund” for the 2017
Is It Any Good? REVIEWING THE CHEAPEST 50 AMP PLASMA CUTTER ON AMAZON
 
05:10
Purchasing the cheapest 50 amp plasma cutter on Amazon. Is it ANY GOOD? Here is my review. Link to 50 Amp Plasma Cutter HERE: http://amzn.to/2E1mr0J ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud WHAT ARE YOU BUILDING? FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 75399 Brandon Lund
Shop Stool (old video edited)
 
09:32
Building a unique space saving shop stool. I came up with this idea right after I finished building my workbench and wanted to have a comfortable seat when building projects. This seat is not only comfortable, it works on both sides of the bench, looks cool and does not take up any floor space. Follow along as I build this unique shop stool. CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds
Views: 302618 Brandon Lund
Beautiful DIY HEADBOARD from an old wood door! Its EASY
 
10:35
This headboard looks complicated, It's not! This is an easy DIY project that can be completed using basic shop tools and basic wood working skills. Impress your friends and family with this rich looking unique headboard built from a recycled wood door! There is also a little WELDING....which is optional! Materials list: 1 Salvaged wood door 6 1x4x8 #2 pine boards (legs and horizontal pieces) 1 1x8x8 #2 pine board (top shelf) 8 feet of 3/4 x 3 1/2" crown molding You will also need some Glue, 1 1/2" nails, 120 and 220 grit sandpaper, primer, paint and a way to apply the finish. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not do the things you see me doing!
Views: 35627 Brandon Lund
Making a Wood and Metal Side Table End Tables
 
09:13
Building an Industrial Style side table end table using reclaimed pallet wood and metal. To add to the industrial feel, I added steel gusset plates and rivets. The wood was stained then treated with a clear satin finish. The metal was brought to a semi-bright finish using flap discs supplied by United Abrasives. After the metal was cleaned it was then treated with a paste wax to resist fingerprints and prevent rust. CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds http://www.unitedabrasives.com/
Views: 137991 Brandon Lund
Mini Pallet Coasters Realistic look with distressed finish!!
 
03:24
Making Realistic Mini Pallet Wood Coasters!! Rustic weathered finish with REAL looking nails! LOOK CLOSELY! In this video I show you how I made an awesome set of DIY Drink Coasters that will impress your company! This is a very easy and FUN DIY project that you can do! CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds For more of my pallet related videos, click the links below! Metal and Wood Head Board! https://www.youtube.com/watch?v=dZJUo-YmBVw Metal and Wood Side Table! https://www.youtube.com/watch?v=xz-b8U3QPDY New Door for the Workshop! https://youtu.be/XO5ZwfcZNhE
Views: 18579 Brandon Lund
👉2018 Model Ansen 180 AMP TIG & Stick Welder review
 
06:07
2018 model Ansen 180 AMP TIG & Stick welder review. High Frequency start, Gas solenoid. Cheapest TIG / Stick Welder on Amazon and it's awesome! In the first episode we went over all of the included accessories and burned some rods. In this episode we are going to go over all the TIG features and functions and see if we can put down a few TIG beads! This welder packs a lot of features for a welder in this price range. I paid for this with my own money! Link to this WELDER: http://amzn.to/2tcNqVY Link to Part 1 - Unboxing and Stick Welding https://youtu.be/TylIq0qJauU ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 11743 Brandon Lund
Welding Custom Door Hinges! Welding and Fabrication!
 
03:07
In this video I show you how to fabricate and weld together a set of custom rustic looking door hinges for the shop door. This is a fun and easy easy DIY project that you can do with basic welding tools. Follow along as I show you how I built this awesome set of rustic looking door hinges! CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds Thanks for Watching! Please be sure to LIKE, COMMENT and SUBSCRIBE! To see the FULL BUILD "Building a Reclaimed Wood Door from Pallets" click the link! https://www.youtube.com/watch?v=XO5ZwfcZNhE welding welder mig welder hinge hinges metal
Views: 10099 Brandon Lund
SHOP BUILT  Portable Band Saw CUTTING JIG is AWESOME!
 
06:10
⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund Check out this AWESOME Shop Built Portable Band Saw cutting jig! This jig allows you to make fast and accurate 45 degree left and right hand miter cuts using your portable band saw! You can even make straight cuts! The jig can be clamped into your bench vise or you can simply clamp it to your work piece and make the cut. This is a prototype and proof of concept that I plan to refine over time. So far, it's a huge WINNER! If you plan to build this for yourself, don't use 3" plate. I think it would work better using 2" plate for the reasons mentioned in the video. CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud WHAT ARE YOU BUILDING? FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 36311 Brandon Lund
Remove a Stuck Hole Saw! THE EASY WAY! Actual video of a hole saw getting stuck!
 
03:36
How to remove and loosen a Stuck Hole Saw THE EASY WAY! While filming my "how to build a bike rack video" I actually had this happen and captured it on video! In this video I show you the easiest and fastest method possible to remove a stuck hole saw from the arbor / mandrel after the locking collar has backed off. No pipe wrenches allowed!!! CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds
Views: 40098 Brandon Lund
Quick Pro Tip SPEED CUTTING accurate and fast cuts!
 
03:22
Make fast and accurate cuts using the speed cutting technique. All you need is a circular saw and a speed square. This is an advanced cutting technique used by tradesman to make fast repetitive cuts in lumber using a circular saw. This technique does not require a lot of skill, but it does take some practice to get good at it. You will be able to make a perfectly straight cuts in lumber every time using this method. I did not invent this technique. It is demonstrated by many Speed Square manufactures, but where as I use this technique often, I figured I would pass it on. The square I'm using in this video is made by Swanson. CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds
Views: 7008 Brandon Lund
The Budget Cordless 1/2" Impact - Craftsman 19.2 volt - Watch Before you Buy!
 
05:51
I recently purchased a Craftsman Cordless 19.2 volt Lithium Ion 1/2" cordless Impact wrench and I decided to see how well it would perform removing tires and wheels. Watch this before buying! You might be surprised! I sure was! ⇨ Craftsman 1/2" Impact Wrench http://amzn.to/2DbgON2 ⇨ 1/2" Torque Wrench http://amzn.to/2reMVtx ⇨Wheel Nut Socket Kit http://amzn.to/2FLoO8U ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not do the things you see me doing!
Views: 19592 Brandon Lund
Building a Reclaimed Wood Door from Pallet Wood and Metal for the shop!!
 
08:28
Building a Reclaimed Pallet Wood Door for the Shop using all recycled materials!!! CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds Royalty Free Music 1:23 Music by: Sirius Beat - Beastmode Link:http://youtu.be/4xNMRODLexc 4:33 Music by: Sirius Beat-Get Set Link:http://youtu.be/xVMi0R5FDnl See my other pallet videos below. Making Mini-Pallet Wood Coasters https://www.youtube.com/watch?v=K9rflGsieeA Industrial Metal and Reclaimed Wood Side Table https://www.youtube.com/watch?v=xz-b8U3QPDY Building a Metal and Reclaimed Wood Headboard https://www.youtube.com/watch?v=dZJUo-YmBVw
Views: 178199 Brandon Lund
Mig Welding broken Cast Iron!
 
04:26
Mig Welding Cast Iron using standard mig wire. YES IT WORKS! In this video i repair a broken leg on a cast iron park bench using standard mig wire. Even though the cast iron was low quality, the repair was solid. Follow along to see the repair step by step. Link to part 2 https://youtu.be/adsLj77zxDI CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds
Views: 92531 Brandon Lund
💥 BEGINNER WELDING SERIES - INSTALLING A WELDER OUTLET
 
13:28
If your thinking about picking up welding as a hobby, or even a profession, this will be a fun series and a great place to start! It doesn't have to be difficult or overwhelming. I will help you figure out what you need and maybe save you some money on things you don't. In this episode, we discuss basic power requirements needed to begin welding. We install a welder outlet and I strike an arc with the 230 AC stick welder that hasn't been fired up in 15 years! ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all go towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not do the things you see me doing! This will be the first episode of the "Beginner Welding" series. This wont be just any ol' instructional video. We are going to be BUILDING SOME COOL STUFF as I share my personal experiences with you. Thanks for watching and be sure to check back often! Brandon
Views: 6279 Brandon Lund
STICK WELDING SHEET METAL with 6013 rods! Beginner Welding Series!
 
09:55
Stick Welding Sheet Metal with 6013 rods! Beginner Welding Series! This is the thinnest sheet metal I have ever welded using this process. I'm welding very thin 16 gauge metal to even thinner 20 gauge metal It's not easy to do but it can be done with a little practice. Learn some tips and tricks as I get this repair work done! ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund Lint to the Welder I'm using: https://amzn.to/2JjM9jr Link to the Plasma Cutter I'm using: https://amzn.to/2Hq5AFx Link to Material Thickness Gauge I use: https://amzn.to/2JtnXhV THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 35640 Brandon Lund
6011 Vs  6013 BEST POLARITY for WELDING SHEET METAL
 
14:09
6011 Vs 6013 Which ROD and Polarity is BEST for WELDING SHEET METAL? Have you ever wondered what the difference is between 6011 and 6013 electrodes and what happens if you switch from DC Positive DCEP to DC Negative? DCEN Here is a side by side comparison of how each of these rods performs on sheet metal doing exactly that! See the results for yourself! The test material we used is 16 gauge (1.29 mm) sheet metal and the rods are 1/16" (1.6 mm) 6011 and 6013. The manufacturer recommended running these rods at 20-40 amps. I found that 20 amps was the sweet spot on my machine. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Welder: https://amzn.to/2t4rOZF Chipping Hammer: https://amzn.to/2sW4JIy Welding Helmet: https://amzn.to/2JGmGFa Any commission earned from the above Amazon affiliate links all go towards helping to support the channel. FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 33905 Brandon Lund
Splitting BIG Hardwood with a 5 Ton Electric Hydraulic Wood Log Splitter
 
09:29
Splitting BIG Hardwood with a 5 Ton Electric Hydraulic Wood Log Splitter! Let me start be saying that I had very low expectations at first because it is only rated to split a 10" - 25.4 cm log - but this wood splitter has proven me wrong. It has split just about everything I can throw at it. Every year I cut, split and stack hardwood firewood by hand. It's a lot of work and towards the end I am exhausted and usually decide to rent a wood splitter for a few days. This year I decided to purchase an inexpensive 5 ton electric hydraulic wood splitter from Harbor Freight Central Machinery and I am completely amazed at how well this works. If your considering purchasing an inexpensive log splitter, you cant go wrong. It never runs out of gas, it always starts and you don't have to listen to a noisy engine all day. It's simple and it works great! At the time of this video, the log splitter lists for $299. I used a 20% off coupon which brought the price down to $239. It costs 55/day to rent the smallest log splitter in my area. 3 days rental is $165, so for $74 dollars more than renting, I was able to purchase this and I own it afterwards!. Now I can split firewood at my leisure and I don't have to pay rental fees next year! MORE SHOP TOOL RELATED VIDEOS: https://www.youtube.com/watch?v=JV19MbNl38A&list=PLfbf78fMz9VqsPUWumUyUpdw5XXmvY2Ce ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 6815 Brandon Lund
Stick Welding Cast Iron Repair with Muggy Weld
 
12:45
Stick Welding Cast Iron Repair with Muggy Weld. Cast iron can be tricky to repair because it's prone to cracking. Follow along as I repair a broken cast iron exhaust manifold using Muggy Weld with no pre-heat. For this demonstration I used a 2 step process starting with an electrode that can withstand the dirtiest of cast irons followed by a cap that has excellent crack resistance properties. Although I believe a good pre-heat and a slow cool down will give you the best chance for success, i wanted to see how this rod would respond in a worst case scenario such as cold welding. It handled the thermal stresses excellent without any signs of cracking. This would be a huge bonus for parts too big to get a good pre-heat / cool down or for parts that are not cost effective to be removed. Hit the notifications! We are going to be doing some more experiments with these rods, including tig welding. More Cast Iron Welding Videos HERE https://www.youtube.com/watch?v=kzbcVb2UymA&list=PLfbf78fMz9VpweFv4IqUfrrNV6Vvro7Cd Link to Welder https://amzn.to/2MsrEWx Link to Welding Rod Information: https://www.muggyweld.com/ BUY Muggy Weld Rods HERE: 3/32 https://amzn.to/2SLmW6k 1/8 https://amzn.to/2M0z1ln MIG Welding Broken Cast Iron video: https://youtu.be/-8ct6Awo_2I ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 1240224 Brandon Lund
Stick Welding Cast Iron Repair using 7018 Welding Rods
 
07:43
Welding Cast Iron Repair using 7018 Welding Rods. Cast iron can be tricky to repair because it wants to crack from welding. For this repair I stick welded cast iron to cast iron using 7018 welding electrodes and then I tried stick welding cast iron to mild steel using the same 7018 welding electrodes. This repair was done using the cold method, meaning no preheat or post heat was used. Follow along as I demonstrate how to repair cast iron using 7018 welding rods. Disclaimer: This is for entertainment purposes only. Do not weld your cast iron cookware. You could poison yourself. More Cast Iron Welding Videos Here: https://youtu.be/9pMbeG7QVZA?list=PLfbf78fMz9VpweFv4IqUfrrNV6Vvro7Cd ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 84629 Brandon Lund
WELDING CART MODIFICATION!!
 
04:29
Welding Cart Modification! Welding together a much needed sleek looking handle to the mig welding cart using just scrap metal! BUY WELDING CART HERE: http://amzn.to/2E675eE CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds
Views: 4808 Brandon Lund
STICK WELDING THIN METAL  using 120 volt power - 💥Beginner Welding Series
 
11:27
STICK WELDING THIN METAL using 120 volt power Beginner Welding Series. Follow along as I repair some thin metal using 6011 electrodes. I discuss metal prep, things to consider when using extension cords and show you a few gadgets to make welder setup a breeze! Link to Welder: https://amzn.to/2J6MngZ Link to Metal Thickness Guage: https://amzn.to/2LxY0vV SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds Online Welding Calculator: https://www.millerwelds.com/resources/weld-setting-calculators For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 49231 Brandon Lund
PEN / PENCIL HOLDER from cedar log
 
03:50
Here i create a useful pen / pencil holder from a cedar tree that had blown down on our property. CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds
Views: 4364 Brandon Lund
Catastrophic Chop Saw Failure and Neglected Tool Repair Tips!
 
12:46
Catastrophic Chop Saw Failure and Neglected Tool Repair Tips! In this video, I discover my 12" chop saw has suffered a catastrophic failure. I show you how I diagnose the problem, replaced the brushes and how to "seat" them if necessary. I also show you how I resurfaced the damaged part of the motor to save a little money and get some more life from the tool and i show you how to clean the commutator. I also discuss some tips and tricks on how to avoid this problem to begin with. CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds
Views: 24182 Brandon Lund
Building a Headboard from Recycled Pallet Wood
 
04:08
Building a Headboard from Recycled Pallet Wood. This is an easy DIY project you can complete in a weekend. The metal frame around the headboard is a recycled bed frame. The metal was painted in a hammered finish and the pallet wood was sanded and finished with a dark stain to add a warm cozy feel to our bedroom. This is a very fun weekend project that will add a lot of warmth and character to any bedroom. If you enjoyed this project, please consider subscribing and hitting that like button. Let me know what you think! CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds
Views: 4465 Brandon Lund
INDUSTRIAL STYLE CART with vintage storage bin
 
14:45
Building an industrial style cart with a vintage pull out storage bin wooden box. The wood top is from reclaimed pallet wood. In the episode, my daughter learns to mig weld for her very first time. You wont belive the results! CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds Materials: 1 1/2" x 1/16" angle iron. Shelves are made from reclaimed pallet wood and finished in Olympic Mahogany Gel Stain. Vintage antique wood box was treated with Minwax Paste Wax only. The 12" drawer slides were sanded and sprayed with hammerite brown paint to blend into the color of the vintage wooden box. The metal cart was sanded with a 60 grit flap disc to remove all mill scale, followed by 150 grit sand paper. It was then brought to a bright finish with 220 grit paper, then cleaned with mineral spirits and the shelves and bare metal were all sprayed with clear satin enamel. The wood and top metal surface was then given an additional coat of Minwax Paste Wax for additional protection. The 3" wheel casters are non-maring sourced from Amazon.
Views: 262423 Brandon Lund
Wood and Metal Subdued Flag Industrial Coffee Table BUILD
 
08:57
Wood and Metal Subdued Flag Industrial Coffee Table BUILD. I've teamed up with Wicked Wood Rustic Flags to create a one of a kind industrial style coffee table. This project has it all! Welding, MIG Welding, TIG welding, cutting, grinding, fabrication and wood working! I love how this project came out! ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Order a hand crafted rustic flag: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 4832 Brandon Lund
TIG Welding Nickel Rod Cast Iron Repair Cast Iron Skillet
 
18:24
TIG Welding Nickel Rod Cast Iron Repair Cast Iron Skillet. Cast iron can be tricky to repair because it's prone to cracking. Follow along as I repair a broken cast iron skillet handle using specialty welding rods with TIG. I also show you 5 ways to determine if your part is cast iron or cast steel. This repair method uses a preheat and a cool down. For this repair I used Muggy Weld #77 welding electrodes for it's excellent crack resistance properties. After the repair was made, I wanted to see just how strong a piece of welded cast iron really is, so I clamped the handle to the workbench and began stacking weight on the skillet until eventually the weld failed! Wait until you see the results! This is just a demonstration. Nickel is a carcinogen. I would not weld anything with nickel that you ingest. I chose to weld this skillet to eliminate any accusations that this is made from anything other than cast iron. Hit the notifications bell so you don't miss out on weekly episodes! BUY Muggy Weld Rods HERE: 3/32 https://amzn.to/2SLmW6k 1/8 https://amzn.to/2M0z1ln Link to Welder https://amzn.to/2xmcatP More Cast Iron Welding Videos: https://youtu.be/9pMbeG7QVZA?list=PLfbf78fMz9VpweFv4IqUfrrNV6Vvro7Cd Stick Welding Cast Iron Repair With Muggy Weld https://youtu.be/kzbcVb2UymA MIG Welding Broken Cast Iron: https://youtu.be/-8ct6Awo_2I ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Comments that contain profanity, rudeness or bullying will be removed and the user will be banned from making future comments on this channel. I encourage discussion and disagreement, just keep it clean and be respectful towards one another. Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing! DO NOT WELD YOUR CAST IRON COOKWARE WITH THIS OR ANY OTHER WELDING ELECTRODE. WELDING ELECTRODES CAN BE POISONOUS.
Views: 5538 Brandon Lund
Installing Vinyl Door Trim on the Entry Door - Detailed Instructions
 
13:29
YOU ASKED FOR IT! Installing vinyl door trim (brickmold) on the exterior door. Follow along as I show you detailed step by step instructions on how to replace your worn out and weathered exterior wood trim and replace it with new maintenance free vinyl pvc trim (brick mold) NO MORE SCRAPING AND PAINTING! Viewers that have seen my previous vinyl trim video have asked for more of an instructional video, rather than a demonstration. Well here it is! CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds Link to condensed vinyl trim video: https://youtu.be/hWEgqEZE4eE Link to "Speed Cutting" video https://youtu.be/7AOqNNUabbM Link to materials I used: Veranda Trim Board http://www.homedepot.com/p/Veranda-1-2-in-x-12-in-x-8-ft-Reversible-Cellular-PVC-Fascia-H120WWS2/203733425 Vinyl Brickmold (door casing) http://www.homedepot.com/p/2448-1-1-4-in-x-2-in-x-8-ft-PVC-Composite-White-Brick-Moulding-0244808012/100077259 Music by Joakim Karud http://youtube.com/joakimkarud
Views: 64257 Brandon Lund
IS IT CAST IRON OR CAST STEEL? 5 Ways To identify Before Welding
 
06:53
Is it Cast Iron or Cast Steel? 5 ways to help you identify before making your welding repair! One of the first steps in making a cast iron welding repair is to determine if it is in fact cast iron. I explain and demonstrate 5 easy ways to help you identify if it's cast iron or cast steel. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund MORE CAST IRON WELDING VIDEOS: https://www.youtube.com/watch?v=9pMbeG7QVZA&list=PLfbf78fMz9VpweFv4IqUfrrNV6Vvro7Cd Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 2748 Brandon Lund
Metal Thickness Gauge and why you should have one!
 
01:49
Metal Thickness Gauge and why you need one! I consider this a must have shop tool. It's a great tool to have in the workshop, on the job site or even while your shopping your local metal yard. Take the guesswork out of the material thickness you are working with. Knowing the correct material thickness will help you set up your welding machine. Even though I didn't mention it in the video, the smaller notches on the end of the tool can also be used to determine common MIG wire sizes. Link to Metal Thickness Gauge HERE: http://amzn.to/2EywKdF THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 1516 Brandon Lund
Building a Reclaimed Wood Head Board from Pallet Wood and Metal for a King Size Bed!!
 
11:34
Building a beautiful Reclaimed Wood Head Board from pallet wood! The headboard is then accented with a metal frame border. All the materials used for this project were free! Learn how you can build an amazing DIY custom headboard just like this one, basically for FREE! Be sure to check out my other Pallet wood videos! Please be sure to LIKE, COMMENT and SUBSCRIBE for more great DIY videos! CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds Making Mini-Pallet Wood Coasters https://www.youtube.com/watch?v=K9rflGsieeA Industrial Metal and Reclaimed Wood Side Table https://www.youtube.com/watch?v=xz-b8U3QPDY New Door for the Workshop! https://youtu.be/XO5ZwfcZNhE
Views: 18903 Brandon Lund
Cast Iron Welding Repair using Flux Core Wire
 
17:12
Cast Iron Welding Repair using Flux Core Wire. Follow along as I repair this broken cast iron using Matheson .030 Flux Core welding wire. For this demonstration I explain the benefits of a preheat as well as controlling the cool down rate by burying in dry sand. Be sure to check out the other repair videos in this series to see how this welding repair method compares to the rest. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Link to Flux Core Nozzle https://amzn.to/2Qozz9E Link to Hobart Handler 140 Welder https://amzn.to/2E3UAk5 Link to MIG Pliers https://amzn.to/2QuszI8 MORE CAST IRON WELDING VIDEOS HERE: https://www.youtube.com/watch?v=kzbcVb2UymA&list=PLfbf78fMz9VpweFv4IqUfrrNV6Vvro7Cd Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 182233 Brandon Lund
EASY Grinder Storage Rack built from Scrap Metal
 
02:58
Easy Grinder Storage Rack built from Scrap Metal. This is a great project to start out on if your a beginner welder or if you are like me and trying to create a little workshop organization! I built this using left over scrap metal. Now I can keep my grinders and abrasive discs close by and organized. I have included all of the dimensions and the materials that I am using in the video. Link to Welder: https://amzn.to/2MrxjfB ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 1810 Brandon Lund
Permanently Restore Faded Plastic and Make it look NEW AGAIN! E.3
 
08:23
Permanently Restore Faded Plastic Make it look NEW AGAIN! This is a permanent fix! Follow along as I show you how I took the original weather faded and oxidized plastic hood and cowl and made them look factory new again without paint, clear coat, heat or scraping with razor blades. This simple process involves wet sanding and machine buffing. For my application I started out with 150 grit then progressed to 220, 320, 400 then jumped to 1500, followed by machine polishing with polishing compound and then a final polish with mirror glaze then an automotive wax to protect everything for years to come. If I can do it with great results, so can you! This is the first time I have ever tried this with plastic and the results were no less than spectacular! ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Link to Electronic Buffer: https://amzn.to/2KHec10 Link to Rubbing compound: https://amzn.to/2N4H3sV Link to 3M Pad Glaze https://amzn.to/2m5iocc Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 3058 Brandon Lund
The PILE Trailer Rebuild Series E.8 THE FINAL EPISODE!
 
16:42
Welcome to the 8th and final episode of the PILE Trailer Rebuild Series. Check out the surprise that was mentioned in Episode 7. We begin by getting the trailer ready for primer and paint which means we have to get the metal clean. We start by sandblasting the trailer using a handheld sandblaster. We then spray everything with a coat of primer. Once the primer is dry, it's time for several coats of gloss paint. I reveal a huge problem that happened while painting the trailer. We then add a storage box, tongue jack, finish the trailer lighting and wiring and add a special custom touch. This was a fun episode and I hope you enjoyed watching as much as I did building it! CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds
Views: 1002 Brandon Lund
Building an Industrial Coffee Table for Charity - Metal & Wood
 
11:20
Building an Industrial Metal and Wood Coffee Table for Charity. Dimensions 30x30x19 made of 1 1/2" metal angle, 3 1/2" plate and expanded metal. The pallet wood top was flame distressed then sealed with boiled linseed oil while still hot from the flame process. The wood was then sealed using Minwax paste wax. The TIG welded metal frame was stained using Sculpt Nouveau black stain and then sealed using Minwax satin PolyCrylic. This piece was handcrafted to last generations. The products I used to finish this piece are available in the links below. Every year Klearview Manor of Fairfield, Maine holds a silent auction. The funds raised from that auction go towards helping special needs folks that are wheelchair bound attend a summer camp. I built this coffee table for that purpose. I hope that the successful bidder enjoys this table for many many years as much as I did building it. The auction will be held on Sunday April 22, 2018 at the Fairfield Community Center at 12 noon. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Linseed Oil used in this project: https://amzn.to/2ELKC2x Minwax Paste Wax used in this project: https://amzn.to/2IZOgZf Minwax PolyCrylic Sealer used in this project: https://amzn.to/2qATDqi Metal Stain used in this project: https://sculptnouveau.com/products/smart-stains Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 6310 Brandon Lund
MAKING AWESOME WALL BRACKETS L BRACKETS!
 
04:46
We all have that space that seems to collect a lot of clutter, well today we fabricate a set of AWESOME wall L brackets to help eliminate that clutter and organize the area along the side of my shed. Follow along as I show you step by step on how you can make a simple set of wall brackets to help organize your area and keep your wood and metal storage area neat and tidy. The metal I'm using is 1x 3/16 square tube which was left over material from the tailgate fabrication of the PILE Trailer Rebuild Series - tailgate episode. CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds Music by Joakim Karud http://youtube.com/joakimkarud
Views: 3022 Brandon Lund
💥 BEGINNER WELDING SERIES   LEARN HOW TO MIG WELD E.4
 
18:25
Welcome to the 4th episode of the Beginner Welding Series. In this episode I am going to show you how to MIG weld. Learn about torch angle, stick out, wire feed speed, and welding techniques. Link to Metal Thickness Gauge HERE: http://amzn.to/2EywKdF Link to Welder: https://amzn.to/2xk25xp SHOP THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 264543 Brandon Lund
Installing a Dishwasher (from scratch)
 
09:56
In this video I take a break from my usual content and travel to moms house to install a new Whirlpool Dishwasher and a new Kitchen Faucet for her. The tricky part...I'm starting from scratch. I need to make room. Cabinets are installed in the space where she wants the Dishwasher! Follow along as I show you the tools I used to remove the kitchen cabinets, rough in the plumbing, solder copper water supply lines, add fittings to PEX tubing, add shutoff valves, rough in the drain lines and complete the electrical work. I also install a new Pfister Kitchen Faucet. The finished project came out great! Stay tuned until the end....there is a small crafty project for the bathroom that my wife and I made for my mom from an old basement window. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔵 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not do the things you see me doing!
Views: 6417 Brandon Lund
Home Depot LED Shop Light unboxing and 6 month review
 
03:17
Unboxing and 6 month review of Home Depot Commercial Electric LED Shop Lights. I purchased 3 of these LED Shop Lights from Home Depot approximately 6 months ago and liked them so well that I decided to purchase 2 more. Watch as I compare regular incandescent bulbs to this LED lighting. CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds Buy 4 foot LED shop light here: http://m.homedepot.com/p/Commercial-Electric-4-ft-White-LED-Linkable-Shop-Light-54103161/205331022?cm_sp=BazVoice-_-PRRDR-_-205331022-_-x
Views: 19555 Brandon Lund
Welder Repair Adjusting the High Frequency Contacts
 
03:49
Welder Repair Adjusting the High Frequency Contacts. Does the ARC on your TIG Welder sometimes not start or maybe when you press the trigger all you hear is a buzzing sound from inside the welder. It could be a very simple and easy fix! Today I'm going to show you how I inspect, clean and adjust the high frequency contacts inside a high frequency TIG Welder and get it running new again. This video is for entertainment purposes only. There are capacitors inside the case that store energy when the unit is unplugged. You can be electrocuted and die even if the unit is unplugged. Do not open the case. Take it to a professional. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing! ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 1384 Brandon Lund
Another Budget Welder! The Ansen 205S Stick and TIG Welder
 
06:30
Another Budget Welder the Ansen 205S Stick and TIG Welder. This is a great affordable DC Stick and TIG welder packed with features. Today we are going to do some stick welding / arc welding and find out if the Ansen 205S is able to run a 6010 electrode. Link to this Welder https://amzn.to/2TyYd64 Detailed welder review - exact same features as the 205s https://youtu.be/TylIq0qJauU Link to the Tools and Gear I use: Amazon.com/shop/brandonlund Detailed welder review: https://youtu.be/TylIq0qJauU Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 3398 Brandon Lund
Installing Interior Window Trim (casing)
 
06:36
Installing Interior window trim (casing). Follow along as I show you step by step how to trim out a window! First we begin the process by selecting lumber at the big box store and then we head home to measure up the windows so we can start building the extension jambs. After the extension jambs are installed, I fill the voids with expanding foam to seal out any drafts. Watch for the Pro-Tip to make your project go a little smoother. Next, on to making the window casing. I router the edges for a smooth look, rip a thin transition piece for the top casing and cut a 22 degree bevel on the window apron (piece below the window sill). I love how elegant, yet simple it looks. CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds Music by Joakim Karud http://youtube.com/joakimkarud
Views: 5856 Brandon Lund
👉AMAZING! 2018 Model 180 AMP DC TIG, STICK, Hi Frequency, dual voltage Welder, COMPLETE PACKAGE!!!!
 
17:59
Amazing Welder! This is a 2018 model 180 AMP DC TIG, Stick, Hi Frequency, dual voltage inverter Welder, complete package! Includes 2T and 4T function. Reviewing the cheapest 180 AMP DC TIG AND STICK WELDER on Amazon! Ansen TIG 185S. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund Link to this WELDER: http://amzn.to/2tcNqVY THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 36397 Brandon Lund
Welding Cast Iron Visual Inspection and Testing
 
14:22
Welding Cast Iron Visual Inspection and Testing. I recently repaired some cast iron using Muggy Weld electrodes. During that episode, some of the viewers said the part I was welding was cast steel, even though we spark tested and drill tested it. I figured this would be a great opportunity to cut open our weld and do some more testing and experiments. Welding cast iron can be tricky because it is prone to cracking. In this episode I show you a 3rd option to help determine if something is cast iron and then we weld it up again using some 6010 electrodes on the Blue Demon welder. Many inverter welders wont run a 6010 rod. We then try solid mig wire, followed by TIG welding with some mild steel filler wire, then we experiment with TIG welding some 316L stainless filler wire. The results are what you would expect from no pre and post heat with a continuous weld. I hope you enjoyed these experiments as much as I did doing them! BE SURE TO TUNE IN NEXT WEEK! WE ARE GOING TO BE DOING SOMETHING WITH CAST IRON THAT HAS NEVER BEEN DONE BEFORE! THEN WE ARE DOING A COMPLETE REPAIR FROM START TO FINISH! ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Link to Blue Demon Welder https://amzn.to/2MsrEWx Lenox Metal Max Diamond Cutoff Wheel: https://amzn.to/2M6xyJ0 Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 18655 Brandon Lund
Diagnose and Repair Blown Head Gasket on Craftsman Snow Blower
 
08:49
Diagnose and Repair Blown Head Gasket on Craftsman Snow Blower. Is your small engine giving you trouble? Follow along and hear the symptoms and what I did to fix it. It started to make popping sounds through the exhaust muffler and then suddenly it completely stopped running. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund Briggs & Stratton Head Gasket HERE: http://amzn.to/2E8UisC 1/4" Cordless Impact http://amzn.to/2C2XCiX Brass Cleaning Brush http://amzn.to/2EP2YBz THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund SPECS: Valve Clearance: Intake - .004 - .006 Exhaust - .009 - .011 Head Bolts Torque - 225 in lbs Spark Plug Gap .030 Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud WHAT ARE YOU BUILDING? FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 1262 Brandon Lund
I'M DONE WITH ABRASIVE CUTOFF WHEELS!!! Diamonds can be for guys too!
 
03:46
Follow along as I fabricate and TIG weld a cell phone mount to be used on various tripods. I paid for this with my own money. This is NOT a sponsored video. During this project, I get an opportunity to review the Lenox Metal Max diamond cutoff wheel. It's rated for 1000 cuts! So far I am very impressed! Link to Lenox Metal Max! https://amzn.to/2J3tz29 Link to Tig & Stick Welder: http://amzn.to/2tcNqVY Link to Part 1 Welder Review https://youtu.be/TylIq0qJauU ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 3906 Brandon Lund
Horseshoe Bowl Welding Project Ideas for the Holidays
 
07:42
Horseshoe Bowl Welding Project Ideas for the Holidays. Here is an easy welding project that would make an excellent gift idea. This is also a great beginner welding project. Step by Step instructions on how to create this Horseshoe Bowl. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds MATERIAL LIST: 8 - Size 0 Horseshoes: https://amzn.to/2Dop8fd 2 - Size 00 Horseshoes: https://amzn.to/2DGaErT 4 - 1/4" x 2" bolts 1 - Rustoleum Dark Bronze spray paint: https://amzn.to/2RQx6BQ 3 - Sticky back Felt: https://amzn.to/2OMjjdw TOOLS I USE: Hobart Welder: https://amzn.to/2DGbwwF Wire Cup Brush: https://amzn.to/2TdqeQB 3/8 Cordless Drill: https://amzn.to/2zbbCZz For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 1506 Brandon Lund
GET ORGANIZED Awesome Storage Ideas for your Welding Gear
 
06:03
GET ORGANIZED Awesome Storage Ideas for your Welding Gear. Keep all your welding gear organized and in one place with this industrial style storage rack. This is a great beginner welding project, or if your like me. you like your workshop to be very organized. This coat rack is an easy DIY project that you can do with basic hand tools. CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds Be sure to check my other videos! Please Like and Subscribe!
Views: 1372 Brandon Lund
Installing LED Shop Lights
 
04:01
Installing LED shop lights in the workshop. Step by step instructions on just how easy these LED lights are to install. Follow along as I transform my dark workshop into a bright, easy to work in, work space using these 4 foot LED lights that I purchased at one of the big box stores. You can also find them online if you prefer. I have included a link to the lights below if you want to know more about them. LED Shop Light: https://amzn.to/2JEHjSk CHECK OUT THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund FOLLOW ME ON ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds Link to un-boxing video: LED Unboxing and 6 month review https://youtu.be/2RwE9y4hRPU
Views: 21976 Brandon Lund