Home
Videos like this “MAKE MONEY BY LEARNING METAL FABRICATION $$$”
How to bend square tubing without a bender - metal fabrication
 
10:44
I made this video to show you how to bend square tubing without a bender. You can bend small or large bends this way. You will need a welder, chop saw and math. I ended up making a gate with a couple bends and this is why i ended up using this method. I didnt have a bender…. But i did have my skills, and now they are yours! I hope that helps. See you later internet. Start over the math portion here: 04:50 SONGS: the urban symphonia, bubble walk. Both can be found on the youtube audio library
Views: 63422 TRY to HELP you
Top 7 Metalworking Tools You Can Buy Online
 
14:03
Top 7 Metalworking Tools You Can Buy Online ======================================== Join Our Network- https://www.freedom.tm/via/ChopBusters Subscribe us- youtube.com/c/ChopBusters?sub_confirmation=1 Other Links 5 Cool Gadgets You Can Buy Online https://www.youtube.com/watch?v=RLw2BfR_l7g&index=2&t=0s&list=PL9NFmDOdOtde9QW8-1uMtHqLJbN6aJgCE 💗 Likecoin – Coins for Likes: https://likecoin.pro/@chopbusters/pcg8/taf1 Amazon gadgets https://www.youtube.com/watch?v=G6ymv0aYEdM&list=PL9NFmDOdOtdeMTNMY56yHCk2jM0s98Knn&index=2&t=0s ================================================= 7 FEIN pipe milling machine RSG 1500 https://fein.com/en_us/sawing-and-cutting/pipe-milling-machines/ 6 PUNZONADORA HIDRAULICA NARGESA MX340 https://www.nargesa.com/en/industrial-machinery/hydraulic-punching-machine-mx340g 5 KAKA Hand Notcher US-- https://amzn.to/2ykNd2u Canada-- https://amzn.to/2zWsIez Other-- https://www.kakaindustrial.ca/products/kaka-manual-pipe-notcher-ra1 4 Metalcraft Master Twister picket http://www.metalcraftusa.com/twisters.html 3 marvel 600A-PC3.1S Bundle Saw https://www.marvelsaws.com/product/600-series-pc3-bundle-cutting-bandsaw/ 2 Bead Roller Drive System https://www.eastwood.com/eastwood-bead-roller-drive-system.html 1 Metabo beveling tool US-- https://amzn.to/2ylFHnY Canada-- https://amzn.to/2Rx83Ev Other-- https://www.metabo.com/com/en/tools/cutting-sanding-milling/metal-processing/bevelling-tools/
Views: 2320856 Chop Busters
Day in the life of a mobile welder
 
14:10
As requested: Video of my day on Monday August 6th, 2018. Original call was for a sagging door on a dumpster "box". Job ended up being a bit more... Typical for most jobs, there is always more than originally described.
Views: 7624 Welding Information
Genius Idea with a Giant Bearing
 
05:15
We have scrap metal and a giant #bearing. From these parts I will show you how to make a useful tool for bending metal. Do it yourself this homemade #invention. Thanks for watching my video. Subscribe my youtube chanel mr. inventor. #DIY
Views: 968 Mr. Inventor
Plasma cutting perfect circles with one easy to make tool.
 
06:54
R Tech plasma cutter http://amzn.to/2nFUynZ How I use a simple tool to cut a range of different sized circles using a hand held plasma torch.
Views: 67451 Urchfab
MIG and STICK Welding a Quick Change Hitch with Bagger Fabrication
 
13:37
MIG and STICK Welding a Quick Change Hitch with Bagger Fabrication. In this video I take you through the design process of fabricating an Extreme Duty Quick Change Hitch Mount that can be used to support our new bagger that was just picked for FREE at a local yard sale! I start by plasma cutting some 5/16" steel plate then we cut up am old hitch and weld everything together using MIG and Stick Welding. Link to Plasma Cutter: https://amzn.to/2uuCj9e Link to Welder: https://amzn.to/2AqPugU ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 2464 Brandon Lund
Making a track drive trike #1
 
19:09
The crawlers are vehicles that have always attracted us as they are more uncommon compared to the usual ones that they use wheels. ► Click HERE to subscribe to Make it Extreme: http://bit.ly/MakeitExtreme • Get access to the downloadable Plans: http://bit.ly/MIEplans • All details: http://bit.ly/2MuLCkm • Help us on patreon: http://bit.ly/MIEpatreon Welding Machine: • Mig: http://bit.ly/Rallymig • Tig: http://bit.ly/PITIG Social Media: • Facebook: http://bit.ly/Makeitextreme • Instagram: http://bit.ly/makeitextreme • Special Thanks to our Patrons: ✔TOP Patron: [Devin Bauste and Andrew Gold] Petar teljega, Enrique guzman Mendez, Renewable Systems Technology, Doug norris, Leonardo Arguedas Rodríguez, Moises Estrada, Garrett Evans, Andrew Barbosa, RONILDO ADOLPHO STRYMPL, Jean-Dominique Verdet, Kepha Nyariki, Henry Levine, Aaron Klepzig, Matt Pearce, Paul Jacobs, Nghiem Xuan Cuong, T1toine, Dylan Elliott, Giovanni, ALIN, Travis Riley, Jesse Ting, Caze Paul • Playlist for all videos: http://bit.ly/2gZL4Dg • Intro Design: https://vimeo.com/90149001 ♫Music: Travels into the Unknown by TeknoAXE is licensed under a Creative Commons Attribution 4.0 International License Metal and Medeival by TeknoAXE is licensed under a Creative Commons Attribution 4.0 International License Rock Energy by Audionautix is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Smells Like Grunge by Audionautix is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ ╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗ ║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ ╠╗║╚╝║║╠╗║╚╣║║║║║═╣ ╚═╩══╩═╩═╩═╩╝╚╩═╩═╝ #makeitextreme #trackdrivetrike
Views: 7334723 Make it Extreme
Forming Sheet Metal & Metal Forming Tools - Uses Explained By Gene Winfield at SEMA
 
46:45
The legend - Gene Winfield - giving a metal working demo at SEMA 2014. A must watch for newbies and veterans alike. LINK TO BUY ENGLISH WHEEL: https://www.eastwood.com/benchtop-english-wheel.html?utm_source=youtube&utm_medium=annotation&utm_campaign=2014-12-04&utm_content=english%20wheel LINK TO SHRINKER STRETCHER https://www.eastwood.com/shrinker-stretcher-combo-set-two-bodies-two-jaws.html?utm_source=youtube&utm_medium=annotation&utm_campaign=2014-12-04&utm_content=shrinker%20stretcher This video features Gene Winfield giving tips and tricks on the basics of metal fabrication in the Eastwood Booth at SEMA 2014. Not everyone can make it to SEMA, so SUBSCRIBE for future SEMA videos! FEATURED PRODUCTS: - English Wheel Bench Top Item #14156 - Bead Roller Kit - with Mandrels Item #28187 - Shrinker/Stretcher Combo Set-Two BodiesTwo Jaws Item #51088 - Panelbeater Sandbag And Teardrop Mallet Kit Item #28045 - Bullseye Pick Set Of Three Item #31000 - Versa-Bend Sheet Metal Brake Item #14042 Are YOU an Eastwood Guy? Since 1978, Eastwood has been supplying products to people who want to do the job right. Eastwood offers a complete line of hand tools, welders, plasma cutters & accessories, metal working tools, powder coating supplies, paint and paint guns, specialty paints and hard to find products - all for the DIY-er. Eastwood has all the tools and supplies you need to restore your car, motorcycle or truck. Visit eastwood.com today.
Views: 140802 Eastwood Company
TIG Welding Aluminum Fabrication - Sheet Metal Forming - 2 Ovals into 1 Round - Y-pipe
 
18:26
Learn how to TIG weld and fabricate here http://www.6061.com Some of the hand tools I'm using: https://youtu.be/piOrpK0CgfQ
Views: 2033640 6061. com
6011 Vs  6013 BEST POLARITY for WELDING SHEET METAL
 
14:09
6011 Vs 6013 Which ROD and Polarity is BEST for WELDING SHEET METAL? Have you ever wondered what the difference is between 6011 and 6013 electrodes and what happens if you switch from DC Positive DCEP to DC Negative? DCEN Here is a side by side comparison of how each of these rods performs on sheet metal doing exactly that! See the results for yourself! The test material we used is 16 gauge (1.29 mm) sheet metal and the rods are 1/16" (1.6 mm) 6011 and 6013. The manufacturer recommended running these rods at 20-40 amps. I found that 20 amps was the sweet spot on my machine. ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Welder: https://amzn.to/2t4rOZF Chipping Hammer: https://amzn.to/2sW4JIy Welding Helmet: https://amzn.to/2JGmGFa Any commission earned from the above Amazon affiliate links all go towards helping to support the channel. FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 33911 Brandon Lund
Welding Fabrication Basics - Part 2
 
09:25
I MAKE CUSTOM BRANDING IRONS!! www.madcowbrandingirons.com Instagram: @theprorancher @madcowbrandingirons T-Shirts: http://theprorancher.spreadshirt.com/ Facebook: http://www.facebook.com/TheProRancher Twitter: https://twitter.com/#!/TheProRancher Music by Kevin MacLeod at www.incompetech.com
Views: 404175 TheProRancher
Making a Steel Rose
 
07:11
Crafting a rose from scrap. The petals are made from sheet metal off an old sauna heater i found rusting away in the woods. The round stock i found by the sea shore. It was used to bind logs together during shipping. ------------------------------------------------------------------------------------------------------------ music by audionautix.com Jason Shaw - Back to the woods under a Creative Commons attribution license http://audionautix.com/
Views: 387577 FinnCrafted
Metal fabrication techniques
 
16:17
Views: 6774 Bad Chad
MONEY MAKING SECRETS REVEALED!!! Running A Welding Business 101
 
38:31
Interested in A Career In Welding? Click Here: http://www.georgiatradeschool.com/
Views: 209360 ChuckE2009
Large Ship Welder
 
07:55
Meet Blake Crome, an Apprentice Welder at Seaspan, an association of Canadian companies involved in coastal and deep sea transportation, bunkering, ship repair and shipbuilding. As a part of the welding team, Blake gets to work with his hands everyday as he builds large scale ships from the ground up, literally. Thanks to his career at Seaspan, Blake is able to have the life he wants on and off site. Facebook: https://www.facebook.com/truecallingcanada/ Instagram: https://www.instagram.com/truecallingca/ Twitter: https://twitter.com/TrueCallingCA?lang=en
Views: 567529 True Calling
DIY Sheet Metal Bending Tool || Sheet Metal Brake
 
06:17
Hello Friends, Today I Make A Sheet Metal Bending Tool. I Hope You Like This Video. Subscribe My Channel For More New Videos. For Dimension And More Information :- http://www.mistrymaketool.com/post_detail.aspx?nrand=6mWum3 Visit My Official Website :- http://www.mistrymaketool.com * Follow Me On Facebook - https://www.facebook.com/mistrymaketool/ Thanks For Watching.. Hit Like & Subscribe Button Crimson Fly - Huma-Huma: https://youtu.be/qpxhgby-ONI Music: Crystal - Vibe Tracks https://youtu.be/BpboFkTeN1w THANKS FOR WATCHING...
Views: 1582438 Mistry MakeTool
28 Welding & Fabrication Tips To Make You A Better Welder
 
35:19
Interested in A Career In Welding? Click Here: http://www.georgiatradeschool.com/ Here are a few of the products that I mentioned in this video: Dark Thread Cutting Oil (This is for a 32oz can, and the cost of shipping) http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575083715&toolid=10001&campid=5337478295&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FOatey-30204-32-oz-Dark-Thread-Cutting-Oil-%2F111334759658%3Fpt%3DLH_DefaultDomain_0%26hash%3Ditem19ec119cea DeWALT Low RPM Drill: http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575083715&toolid=10001&campid=5337478296&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FDeWALT-DW130V-Heavy-Duty-1-2-Spade-Handle-Drill-Driver-Electric-%2F201000032036%3Fpt%3DPower_Tools%26hash%3Ditem2ecc891724 BSX BS50 Premium Stick Welding Gloves: http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575083715&toolid=10001&campid=5337478299&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FRevco-BSX-BS50-Prem-Pigskin-MIG-Stick-Welding-Gloves-w-Red-Flames-XX-Large-%2F350941660366%3Fpt%3DLH_DefaultDomain_0%26hash%3Ditem51b5c0c4ce 3M Welding Respirator: http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575083715&toolid=10001&campid=5337478310&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2F3M-6200-HALF-MASK-RESPIRATOR-WITH-P100-FILTER-CARTRIDGES-SIZE-MEDIUM%2F291121846731%3F_trksid%3Dp2045573.c100034.m2102%26_trkparms%3Daid%253D555012%2526algo%253DPW.MBE%2526ao%253D1%2526asc%253D22591%2526meid%253D6756952823058921641%2526pid%253D100034%2526prg%253D9790%2526rk%253D1%2526rkt%253D8%2526sd%253D221379070232 12" Swanson Speed Square: http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575083715&toolid=10001&campid=5337478312&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FSwanson-Speed-Square-12-%2F191040915314%3Fpt%3DUS_Measuring_Layout_Tools%26hash%3Ditem2c7aed0772 Jackson Nemesis Safety Glasses: http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575083715&toolid=10001&campid=5337478313&customid=&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FJACKSON-NEMESIS-3000354-Safety-Glasses-Clear-Lens-with-Neck-Cord-KC-25676-%2F111148059137%3Fpt%3DLH_DefaultDomain_0%26hash%3Ditem19e0f0ca01 Understanding Stick Electrodes Video Series: https://www.youtube.com/playlist?list=PL_P7k0CDx5cUcxHwIXOaPsNIzMQeFqIsu
Views: 259627 ChuckE2009
TIG Welding Aluminum Fabrication - Sheet Metal Forming a Cone - 6061.com
 
06:38
Learn how to TIG weld and build parts like these here: http://www.6061.com Welder settings Material selection Tools and Machinery used (with part numbers) 60+ short instructional videos Lots of supplemental text when necessary. http://www.6061.com
Views: 2341098 6061. com
DIY Welding Fabrication Table - Stronghand On a Budget
 
15:06
A DIY welding fabrication table that would make a great addition to any work shop. This welding fab table has many of the features of a Stronghand or Certiflat table but at a fraction of the cost. Check out Fireball Tools Mega and Monster squares here: https://www.fireballtool.com/shop Help support the Making Stuff Channel by starting all of your Amazon Shopping here: http://amzn.to/2GorhGJ The Sketchup drawing for this welding fabrication table is available on the Making Stuff Patreon page at https://www.patreon.com/makingstuff Tools used in this video: TIG Welder - http://amzn.to/2EhxVxP CRC Cutting Oil - http://amzn.to/2GrKFm9 Locking C Clamps - http://amzn.to/2BztM5n Automatic Center Punch - http://amzn.to/2FpNhzQ Mega Square - http://www.fireballtool.com/shop Monster Square - http://www.fireballtool.com/shop Thanks for Watching! #fabricationtable #weldingtable #flattable
Views: 126193 Making Stuff
Custom Metal Fabrication - How to Shave a Door Handle - Metal Fab at Eastwood
 
11:53
In this video Matt goes over how to shave a door handle and metal finish the patch with as little body filler as possible. Get Metal Fab Tools: http://www.eastwood.com/metal-fabrication.html#utm_source=youtube&utm_medium=annotation&utm_campaign=2017-09-07&utm_content=Metal%20Fab%20tools Get a TIG 200 Digital : http://www.eastwood.com/tig-200-digital.html#utm_source=youtube&utm_medium=annotation&utm_campaign=2017-09-07&utm_content=TIG%20200%20digital%20welder The Eastwood 200 Amp Digital TIG welder has all the features of a professional machine but at a fraction of the price. Manual Arc (Stick) – DC Positive/Negative with Hot Start and Arc Force control to prevent rod stick and superior arc control. DC TIG – Weld Steel and Stainless Steel DC TIG/Pulse – Minimize warpage and prevent blow through on thin Steel and Stainless Steel - SEE VIDEO AC TIG – Weld Aluminum with ease AC TIG/Pulse - Minimize warpage and prevent blow through on thin Aluminum - SEE VIDEO AC TIG/MIX – Achieve greater penetration on thick material, while having a more stable arc profile for thinner metals. TIG/Spot – Precisely time welds for repeatable production 2T/4T – 2 touch and 4 touch finger control used for amperage control without a foot pedal - SEE VIDEO AC Frequency Control – Fine tune the arc cone width for precise aluminum welding. Programmable settings – 5 Factory Presets and 15 customizable preset to quickly change between your favorite settings. Flex Head 17 Torch – Adjust your torch head to the perfect torch angle in hard to reach places. Gas Flow Meter – Precise gas flow adjustment Rocker Style Foot Pedal – Infinite amperage adjustment without leg fatigue Square Wave IGBT Inverter – Power source enables welding of materials from Aluminum to Steel This machine features AC and DC TIG welding, Pulse, 2T/4T, AC Frequency Control, Spot Timer, and ARC (Stick) welding. The welder comes with a Flex Head 17 torch, Gas Flow Meter, Rocker Style Foot Pedal, Gas Hose and all consumables needed to get started. For more information on Eastwood products visit www.eastwood.com or stay connected with the team via: Facebook - https://www.facebook.com/eastwoodcompany Instagram - http://instagram.com/eastwoodco Blog - http://www.eastwood.com/blog Eastwood has everything you need to do the job right when you're restoring a car, truck or motorcycle - from welders to paint and everything in between.
Views: 15890 Eastwood Company
Metal Working Tips: Custom Firewall with Bead Roller and Pullmax 1979 Trans Am V8TV
 
09:56
http://www.v8speedshop.com We perform all kinds of custom metalwork at the V8 Speed & Resto Shop. Here, we make a sculpted firewall section using the Mittler Brothers bead roller and the Pullmax P21 with custom dies for a 1979 Pontiac Trans Am. Contact the shop today for help on your custom or restoration project! http://www.v8tvshow.com - 314.783.8325 http://www.v8speedshop.com Metal Working Tips: Custom Firewall with Bead Roller and Pullmax 1979 Trans Am V8TV FACEBOOK PAGE: https://www.facebook.com/V8TVshow/ SHOP FACEBOOK PAGE: https://www.facebook.com/V8SpeedShop/ #beadroller #customsheetmetal #fabrication -~-~~-~~~-~~-~- Take a tour of our restoration shop!: "Muscle Car Restoration Shop Tour V8 Speed & Resto Shop November 2018 V8TV" https://www.youtube.com/watch?v=NgMz3iRMHWE -~-~~-~~~-~~-~-
Views: 39695 V8TV
Badass slag chipping hammer - Easy Stick welding project
 
04:12
I was in need of a slag chipping hammer, Instagram inspired project, but I absolutely love how it turned out. If you interested in making your own welding tools, but you have beginner welding skills, this is an easy stick welding project to make.Because if you in to stick welding like me a slag chipping hammer is a must have, and you can learn the stick welding basics while making it.
Views: 15166 Steve's Workshop
jesse james - fabrication skills
 
09:22
jesse james - fabrication skills
Views: 369079 jetforce
Mig Weld Trouble-Shooting: Common Problems & Solutions
 
24:57
Interested in MIG welding lessons? Here's a YouTube playlist that will take you through initial machine setup, as well as horizontal, vertical, and even overhead welding... Interested in A Career In Welding? Click Here: http://www.georgiatradeschool.com/ ChuckE2009 Facebook Page: https://www.facebook.com/pages/ChuckE2009/282164941819994 You can learn MIG for free: http://www.youtube.com/playlist?list=SP_P7k0CDx5cWywuZRYRd3HDZuvy7mTH0k Having issues with your mig welds? We'll take a look at a number of common problems (been there, done that) in this How Not To Weld video on the GMAW (Gas Metal Arc Welding) Process. Here's what we talk about, in order: Traveling Too Fast Traveling Too Slow Too Much WFS (Wire Feed Speed) Too Little WFS (Wire Feed Speed) Too Much Stick-Out Not Enough Stick-Out Wrong Polarity No Shielding Gas... Or Not Enough Shielding Gas Welding "Too Hot" Welding "Too Cold" The "Swan-Neck" gun that fits my Hobart 187, and other Miller/Hobart machines: http://www.usaweld.com/15-Flexible-Swan-Neck-Gun-fits-Miller-Welders-p/m2015-fsbe.htm It honestly isnt a bad upgrade, for $137... General Selection of "Swan-Neck" guns: http://www.usaweld.com/Welding-Accessories-s/44.htm General Selection of HTP Mig Wire: http://www.usaweld.com/Steel-Wire-s/53.htm Two rolls, shipped (The same ones I got) for $35: http://www.usaweld.com/035-ER70S-6-Steel-Wire-10-lbs-Spool-p/er70s6-030-35-2pkmixed3.htm ChuckE2009 Official Facebook Page: http://www.facebook.com/pages/ChuckE2009/282164941819994 Enjoy the video? Then be sure to check out my website for more: http://www.weldingwithstretch.com/
Views: 2571576 ChuckE2009
TFS: Custom 4 Links Part 1
 
17:16
Have you ever wanted to know how to build 4 links? In this episode, Justin breaks it down as he builds a custom lower set of extreme duty 4 links for a '61 Cadillac. It also has some epic arc shots and really cool welding! Tools & Gear We Use and Recommend https://www.amazon.com/shop/thefabricationseries Learn to TIG Weld in Our Class! http://thefabricatorseries.com/classes Subscribe to The Fabrication Series for MORE! Check out the website: http://www.TheFabricatorSeries.com/ Like: https://www.facebook.com/TheFabricato... Follow: IG @The.Fabricator https://Instagram.com/The.Fabricator
Views: 232514 The Fabrication Series
How to Hammer Forming - Shaping Metal With Hand Tools
 
12:17
How can you go about shaping metal with hand tools alone? Follow along as I demonstrate how you can begin shaping metal with hand tools only. We will explore a How To Hammer Forming demonstration. We will hammer form some tank end caps. Hammer forming is one of the oldest, simplest, and least expensive ways to shape sheet metal. This is a handy metal fabrication technique you NEED to learn. Check out the video! ----------------------------------------------------------------------------------------------- *** Lancaster Shrinker Stretchers: http://www.trick-tools.com/Lancaster_Shrinker_Stretcher_Pair_550_STSH_1342 *** Shrinker Stretcher Combo: http://amzn.to/2Dy4F86 *** Shrinker Stretchers: http://amzn.to/2G0yCMG *** Hobart Clamp: http://amzn.to/2DTULeG *** Martin Tools Body Hammers: http://amzn.to/2FX52rf *** Snap-On BF612 Compact Hammer: https://store.snapon.com/Hammers-Compact-Body-Hammer-P884535.aspx ----------------------------------------------------------------------------------------------- Filmed with: *** Main Camera: http://amzn.to/2zWG7RS *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: http://amzn.to/2hLODi9 *** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: https://amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Drone: https://amzn.to/2yDkwkI ----------------------------------------------------------------------------------------------- Follow Me on Instagram: @ HotRodHippie - https://www.instagram.com/HotRodHippie/ Follow Me on Twitter: @ Hotrod_Hippie - https://twitter.com/HotRod_Hippie Follow Me on Facebook: https://www.facebook.com/HotRodHippie/ ----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. #hammerforming #sheetmetal #metalshaping
Views: 97619 HotRodHippie
Stick Welding Cast Iron Repair with Muggy Weld
 
12:45
Stick Welding Cast Iron Repair with Muggy Weld. Cast iron can be tricky to repair because it's prone to cracking. Follow along as I repair a broken cast iron exhaust manifold using Muggy Weld with no pre-heat. For this demonstration I used a 2 step process starting with an electrode that can withstand the dirtiest of cast irons followed by a cap that has excellent crack resistance properties. Although I believe a good pre-heat and a slow cool down will give you the best chance for success, i wanted to see how this rod would respond in a worst case scenario such as cold welding. It handled the thermal stresses excellent without any signs of cracking. This would be a huge bonus for parts too big to get a good pre-heat / cool down or for parts that are not cost effective to be removed. Hit the notifications! We are going to be doing some more experiments with these rods, including tig welding. More Cast Iron Welding Videos HERE https://www.youtube.com/watch?v=kzbcVb2UymA&list=PLfbf78fMz9VpweFv4IqUfrrNV6Vvro7Cd Link to Welder https://amzn.to/2MsrEWx Link to Welding Rod Information: https://www.muggyweld.com/ BUY Muggy Weld Rods HERE: 3/32 https://amzn.to/2SLmW6k 1/8 https://amzn.to/2M0z1ln MIG Welding Broken Cast Iron video: https://youtu.be/-8ct6Awo_2I ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: LundDIYBui[email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 1240289 Brandon Lund
Shop Tour and Update - You Asked, I Delivered!
 
21:09
I've heard your requests, and I'm here to deliver, Welcome to the 42Fab Shop Tour and Update on the last 6 months of renovations and improvements. The items mentioned in the video: (Purchases made via links below support the channel via affiliate commissions) Cutting Station: DeWalt Cold Cut Saw: https://amzn.to/2L3oSTm Peel and Stick Tape Measures: https://amzn.to/2Ne5EvS Paste Wax: https://amzn.to/2w5XTS8 HTP Pro Pulse 200 Welder and Microcut 875SC Plasma Cutter: http://www.usaweld.com Jimbo's Garage: Channel: https://www.youtube.com/user/jimbosgarage Website: https://www.jimbosgarage.com/shop Overhead Equipment: Drop Down Extension Cord: https://amzn.to/2o2ow5U Retractable Air Reel: https://amzn.to/2BCRiUk (not the exact model) Air Compressor and dryer provided in trade by: https://www.aspsoklahoma.com/ Wife not for sale. I SUPER recommend these LED Lights! 4' LED Light Bars: https://amzn.to/2NcxQPH Magnetic Tool Holders: https://amzn.to/2w6Xzmg Lowes Tool Chests: https://www.lowes.com/pl/Tool-chests-tool-cabinets-Tool-storage-work-benches-Tools/1457212135 Dewalt Portaband: https://amzn.to/2w8jdXf Premade Stand for Portaband: https://amzn.to/2PyYsfd Tacklife Laser Distance Measuring Unit reviewed without payment: https://amzn.to/2BOIiMi Vanon Batteries reviewed without payment: https://amzn.to/2wjwzzb Camera Equipment: Rode Micro Microphone: https://amzn.to/2NcPd2R Panasonic HC-VX981K: https://amzn.to/2wku53v Sunpak Tripod: https://amzn.to/2w5Y2VG Dewalt USB Power Supply: https://amzn.to/2MKN01B Other Tools I Stand By: Miller Digital Infinity Welding Helmet: https://amzn.to/2GYBQiX DeWalt 20v Brushless Impact Driver: https://amzn.to/2L3RpIA DeWalt FlexVolt Grinder Kit: https://amzn.to/2kyf7la and Flap Disks: https://amzn.to/2GXRTNW Dewalt 20v SDS: https://amzn.to/2nrnTmr Graco TC Pro Airless Sprayer: https://amzn.to/2JfjCyK Nutsert Rivet Tool: https://amzn.to/2IVWDWh My Soldering Station: http://amzn.to/2Ct8bMF and Heat Shrink Kit: http://amzn.to/2FbjL1I Wire Auto Stripper: https://amzn.to/2npCjDh IsoTunes BlueTooth Hearing Protection: https://amzn.to/2kw0xKJ 3M Radio Headphones: http://amzn.to/2fDhWC4 For a sneak peek of projects to come, please join me at http://instagram.com/42Fabricate If you'd like to learn to weld, consider purchasing a "Weld It Yourself" kit from http://42fab.com
Sheet Metal Fabrication: Basic Machines & Techniques - Shaping A Motorcycle Gas Tank - Eastwood
 
01:04:11
In this video, legendary metal shaper and fabricator Ron Covell shapes a motorcycle gas tank using nothing but Eastwood products, while explaining the tips and tricks he uses in metal fabrication. Not everyone can make it to SEMA, so SUBSCRIBE for future SEMA videos! LINK TO BUY ENGLISH WHEEL: https://www.eastwood.com/benchtop-english-wheel.html?utm_source=youtube&utm_medium=annotation&utm_campaign=2014-12-16&utm_content=english%20wheel LINK TO BUY SHRINKER STRETCHER COMBO: https://www.eastwood.com/shrinker-stretcher-combo-set-two-bodies-two-jaws.html?utm_source=youtube&utm_medium=annotation&utm_campaign=2014-12-16&utm_content=shrinker%20stretcher FEATURED PRODUCTS: - English Wheel Bench Top Item #14156 - Bead Roller Kit - with Mandrels Item #28187 - Shrinker/Stretcher Combo Set-Two BodiesTwo Jaws Item #51088 - Panelbeater Sandbag And Teardrop Mallet Kit Item #28045 - Versa-Bend Sheet Metal Brake Item #14042 In this video, legendary metal shaper and fabricator Ron Covell shapes a motorcycle gas tank using nothing but Eastwood products, while explaining the tips and tricks he uses in metal fabrication. Not everyone can make it to SEMA, so SUBSCRIBE for future SEMA videos! Are YOU an Eastwood Guy? Since 1978, Eastwood has been supplying products to people who want to do the job right. Eastwood offers a complete line of hand tools, welders, plasma cutters & accessories, metal working tools, powder coating supplies, paint and paint guns, specialty paints and hard to find products - all for the DIY-er. Eastwood has all the tools and supplies you need to restore your car, motorcycle or truck. Visit eastwood.com today.
Views: 273149 Eastwood Company
Make A Metal Bender || Homemade Roller Bender
 
10:51
Hello Friends, Today I Make A Roller Bender From Metal. This Is Really A Great Project And Very Useful For Bending Of Metal Pieces. I Hope You Enjoy This Video. For Dimension And More Information :- http://www.mistrymaketool.com/post_detail.aspx?nrand=IreJw6 Visit My Official Website : http://www.mistrymaketool.com Facebook Page : https://www.facebook.com/mistrymaketool/ #Metalbender #Rollerbender Thanks For Watching.. Hit Like & Subscribe Button.. Music :- Song: MBB - Island (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: https://youtu.be/0fLMSubepkY Song: NOWË - I Like It! (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: https://youtu.be/xLI8XBS4_2Y Song: AGST - dreams (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: https://youtu.be/kvRhjsQNqZc Song: Ikson - Balloon (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: https://youtu.be/5ATQUHChH88
Views: 7618055 Mistry MakeTool
DIY Metal Brake for Bending Sheet Metal
 
12:14
In a previous video, I built my own mobile welding tables. For one of the parts, I wanted to bend a 16 gauge sheet of metal for a chip tray. I probably could have figured out a different way to make it, but this serves as an excellent excuse to build my own sheet metal brake! Related Videos: Design Rhyme | Mobile Welding Table | VÄLDBENSH https://youtu.be/JSDtVUqsXAc IKEA Hack | Mobile Workbench | VÖRKBENSH https://youtu.be/153F6-xi0FM Casting Custom Aluminum Drawer Pulls https://youtu.be/mmT1IVK72xc
Views: 1721909 Brian Oltrogge
Welding Plate & Sheet Metal - Fabrication Series: 10
 
18:38
We've covered a lot of information in the last 9 episodes of our Fabrication Series and episode 10 is no different. When building a chassis, a large portion of time is spent working with tabs, plate and sheet metal. This episode will share a number of techniques and tips for getting the most out of your effort when working with these. Be sure to subscribe to our channel or like our pages to receive notifications of the latest video releases. View Welding Supplies – https://timmcamis.com/shop/materials-and-fabrication-supplies/welding-rod-and-supplies.html Drag Racing Tutorial Videos – http://dragrace.academy
STICK WELDING THIN METAL  using 120 volt power - 💥Beginner Welding Series
 
11:27
STICK WELDING THIN METAL using 120 volt power Beginner Welding Series. Follow along as I repair some thin metal using 6011 electrodes. I discuss metal prep, things to consider when using extension cords and show you a few gadgets to make welder setup a breeze! Link to Welder: https://amzn.to/2J6MngZ Link to Metal Thickness Guage: https://amzn.to/2LxY0vV SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds Online Welding Calculator: https://www.millerwelds.com/resources/weld-setting-calculators For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 49237 Brandon Lund
TIG Welding Aluminum Fabrication - 6061.com
 
10:42
Learn how to TIG weld and fabricate with aluminum here: http://www.6061.com Welded with a variable amperage TIG Button controller. Order here: http://www.6061.com/tigbutton.htm
Views: 3611621 6061. com
TIG Welding Aluminum Fabrication - Making a small fuel cell (gas tank) - 6061.com
 
10:11
More videos here: http://www.6061.com TIG Button variable amperage controller: http://www.6061.com/tigbutton.htm
Views: 3620819 6061. com
How to Build a Motorcycle Fender - Metal Fabrication at Eastwood
 
02:54
In this video Matt fabricates a Cafe Motorcycle fender using all Eastwood metal fab tools including the English Wheel, Shrinker & Stretcher, Panel Beater Bag & more! Get English Wheel Here: http://www.eastwood.com/benchtop-english-wheel.html#utm_source=youtube&utm_medium=annotation&utm_campaign=2017-05-22&utm_content=English%20Wheel Get Shrinker/Stretcher Here: http://www.eastwood.com/shrinker-stretcher-combo-set-two-bodies-two-jaws.html#utm_source=youtube&utm_medium=annotation&utm_campaign=2017-05-22&utm_content=shrinker%20stretcher Get Panel Beater Bag : http://www.eastwood.com/eastwood-panelbeater-sandbag-and-teardrop-mallet.html#utm_source=youtube&utm_medium=annotation&utm_campaign=2017-05-22&utm_content=Panel%20Beater%20Bag%20%26%20Mallet Panel Beater Sandbag with Teardrop Mallet gives support and flexibility for precision panel beating and metal shaping. Hand-form metal without nicks or gouges, and with minimal stretching All-leather, 18"x18" panel beater bag has a hook-and-loop fill opening Includes non-marring, 2-1/2" teardrop mallet Just add dry sand to the panel beater bag, and it'll support your sheet metal workpiece while "giving" under the mallet blows, to allow your metal piece to be formed into shape.
Views: 107991 Eastwood Company
BEST Welding Ideas !!!
 
04:25
BEST Welding Ideas !!! #BEST #Welding #Ideas
Views: 263564 SL Sanda
TIG Welding Aluminum Fabrication - Sheet Metal Forming - Round Hole to Rectangle  Hole Transition
 
15:29
Learn how to TIG weld and build parts like these here: http://www.6061.com Welder settings Material selection Tools and Machinery used (with part numbers) 60+ short instructional videos Lots of supplemental text when necessary. http://www.6061.com
Views: 6849665 6061. com
5 Must-Have Metalworking And Welding Tools For Beginners // Quick Tips
 
12:55
Rewind to $999! Lincoln Electric is turning back the clock on their best-selling welder now through November 9th! Use the promo code PM999 at checkout to get an instant rebate of $433 on the Power MIG 210 MP, the TIG Package or the Aluminum Package. http://bit.ly/rewind-makers Here are my picks for the five must-have tools when you're getting into metalworking and welding! This certainly isn't a complete list of all the tools you'd ever need to get into metalworking, but these tools will get you started and will be used no matter how much gear you add to your metalworking arsenal. Enjoy! Angle Grinder : https://amzn.to/2OhOu4b Cutoff Wheels : https://amzn.to/2IolsdQ Grinding Wheel : https://amzn.to/2xWKYC6 Flap Discs : https://amzn.to/2Of0Ie3 Clean and Strip Discs : https://amzn.to/2QfLi6q C-Clamps : https://amzn.to/2zDlrAd Vise Grips : https://amzn.to/2zCJuPz Welding Magnet : https://amzn.to/2Oh248a Lincoln Electric Power MIG 210 MP Welder : http://bit.ly/rewind-makers Welpers / Welding Pliers : https://amzn.to/2QhirPg Chipping Hammer : https://amzn.to/2zDKanM Metal Specific Drill Bits : https://amzn.to/2xSY8jA Countersink Bit : https://amzn.to/2y0HBua Drill And Tap Bit : https://amzn.to/2xYuaL1 👕 Get your Build It Yourself merch! http://bit.ly/BuildItYourselfMerch 📦 Materials Used On The (affiliate): 🛠 Tools Used On The (affiliate): 📹 SUBSCRIBE : https://goo.gl/V5gcNJ 💰 SUPPORT ME : https://goo.gl/pmmpTQ 📲 FOLLOW CRAFTED WORKSHOP! INSTAGRAM: http://instagram.com/craftedworkshop FACEBOOK: http://facebook.com/craftedworkshop TWITTER: http://twitter.com/craftedworkshop PINTEREST: http://pinterest.com/craftedworkshop
Views: 104447 Crafted Workshop
How to Build Headers
 
12:14
Have you wondered how to build custom headers? Maybe you want to build your own but you don't know where to start? In this video, we highlight the header building process and the tools that we offer that can reduce build time. You'll also see tips, tricks, and how-to information that can help guide you through your header build. Here is a list of the tools and matching links to the products you'll see in this video. available on our website https://www.trick-tools.com Icengineworks Modeling Kits. https://www.trick-tools.com/Icengineworks-Exhaust-Header-Modeling-Systems-864 Icengineworks Tube Cutting Jigs. https://www.trick-tools.com/Icengineworks-Header-Tube-Cutting-Jigs-865 Our Entire Icenginworks Store. https://www.trick-tools.com/Icengineworks-Store-867 Angle Finders at Trick-Tools.com https://www.trick-tools.com/Angle_Finders_3 Vertical Band Saws at Trick-Tools.com https://www.trick-tools.com/Vertical_Band_Saws_95 Kalamazoo Belt Sander https://www.trick-tools.com/Kalamazoo-Combination-6-inch-Belt-and-12-inch-Disc-Sander-S612-10573 Belt Sanders Store https://www.trick-tools.com/Belt_Grinders_and_Sanders_21 SPD Exhaust www.spdexhaust.com
Views: 195580 Trick-Tools.com
Welding Fabrication Basics - Part 1
 
08:58
I MAKE CUSTOM BRANDING IRONS!! www.madcowbrandingirons.com Instagram: @theprorancher @madcowbrandingirons T-Shirts: http://theprorancher.spreadshirt.com/ Facebook: http://www.facebook.com/TheProRancher Twitter: https://twitter.com/#!/TheProRancher Music by Kevin MacLeod at www.incompetech.com
Views: 774465 TheProRancher
STICK WELDING SHEET METAL with 6013 rods! Beginner Welding Series!
 
09:55
Stick Welding Sheet Metal with 6013 rods! Beginner Welding Series! This is the thinnest sheet metal I have ever welded using this process. I'm welding very thin 16 gauge metal to even thinner 20 gauge metal It's not easy to do but it can be done with a little practice. Learn some tips and tricks as I get this repair work done! ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund Lint to the Welder I'm using: https://amzn.to/2JjM9jr Link to the Plasma Cutter I'm using: https://amzn.to/2Hq5AFx Link to Material Thickness Gauge I use: https://amzn.to/2JtnXhV THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 35645 Brandon Lund
Is It Any Good?!? REVIEWING THE CHEAPEST WELDER ON AMAZON!!!
 
16:54
This Welder on Amazon: http://amzn.to/2EtnXd1 Interested in A Career In Welding? Click Here: http://www.georgiatradeschool.com/
Views: 2123544 ChuckE2009
TFS: The Secret to Perfect Stainless TIG Welds
 
21:24
"How?" That's always the question: How? "How do you get that perfect stainless weld?" Some swear there is a secret to it, others say its impossible. It's not! It just takes a bit of info which Justin has broken down in this episode all about TIG Welding Stainless Steel. Tools & Gear We Use and Recommend https://www.amazon.com/shop/thefabricationseries Learn to TIG Weld in Our Class! http://thefabricatorseries.com/classes Subscribe to The Fabrication Series for MORE! Check out the website: http://www.TheFabricatorSeries.com/ Like: https://www.facebook.com/TheFabricato... Follow: IG @The.Fabricator https://Instagram.com/The.Fabricator ---------------------------------------------------------------------------------------------------- The only song I used (when was the last time you heard no music on TFS?) Lone Harvest by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100409 Artist: http://incompetech.com/
Views: 692442 The Fabrication Series
Every welder needs these! Beginner welding projects
 
05:36
Found some scrap pieces of metal and figured I need to make me the 3rd hand to hold 2 pieces quick while tac welding them together. The second one is a Mig torch holder where I can hang the torch while not in use. I just recently bought a MIG welder and since I haven't any experience with welding I need to practice on things that are easy to make but also useful in the future. Big thanks to all my patrons especially Sithis Michaelis! If you like my videos support me on Patreon: https://www.patreon.com/ollaris Or tip me: https://www.paypal.me/OllariS Visit my Website for more details: http://www.ollaris.tv Subscribe for more videos:https://www.youtube.com/c/Ollaris Twitter: https://www.twitter.com/Ollari_s Instagram: https://www.instagram.com/ollari.s Music by Epidemic Sound (http://www.epidemicsound.com)
Views: 1825529 Ollari's
Fabrication basics
 
17:06
This is the beginning of a three part series on metal fabrication basics. In this episode we cover 90 degree corners on angle. The steel used in this video was provided by http://www.onlinemetals.com.
Views: 25265 Adventures in Welding!
Welding business advice: Start up, advertising and more.
 
26:40
How I got my start and built my mobile welding business from small roots. Getting and retaining customers.
Views: 5176 Welding Information
Measurement Tools - Fabrication Series: 03
 
11:21
Part three of our fabrication tutorial series focuses on useful tools for measuring, finding angles, pick up points and more. Next week's video will detail the process behind tube bending. Following this, we will look at tube notching techniques before moving on to welding basics. Be sure to subscribe to our channel or like our pages to receive notifications of the latest video releases. View Tubing & Plate – https://timmcamis.com/shop/materials-and-fabrication-supplies/tubing-plate.html Drag Racing Tutorial Videos – http://dragrace.academy
Welding Cast Iron Visual Inspection and Testing
 
14:22
Welding Cast Iron Visual Inspection and Testing. I recently repaired some cast iron using Muggy Weld electrodes. During that episode, some of the viewers said the part I was welding was cast steel, even though we spark tested and drill tested it. I figured this would be a great opportunity to cut open our weld and do some more testing and experiments. Welding cast iron can be tricky because it is prone to cracking. In this episode I show you a 3rd option to help determine if something is cast iron and then we weld it up again using some 6010 electrodes on the Blue Demon welder. Many inverter welders wont run a 6010 rod. We then try solid mig wire, followed by TIG welding with some mild steel filler wire, then we experiment with TIG welding some 316L stainless filler wire. The results are what you would expect from no pre and post heat with a continuous weld. I hope you enjoyed these experiments as much as I did doing them! BE SURE TO TUNE IN NEXT WEEK! WE ARE GOING TO BE DOING SOMETHING WITH CAST IRON THAT HAS NEVER BEEN DONE BEFORE! THEN WE ARE DOING A COMPLETE REPAIR FROM START TO FINISH! ⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund THE TOOLS & GEAR I USE 🔴 https://www.amazon.com/shop/brandonlund Link to Blue Demon Welder https://amzn.to/2MsrEWx Lenox Metal Max Diamond Cutoff Wheel: https://amzn.to/2M6xyJ0 Any commission earned from the above Amazon affiliate links all goes towards helping to support my channel. MUSIC By: Joakim Karud http://youtube.com/joakimkarud FOLLOW ME (for behind the scenes stuff)! ⇨ Instagram: https://www.instagram.com/lunddiybuilds ⇨ Facebook: https://www.facebook.com/LundDIYBuilds ⇨ Twitter: https://twitter.com/LundDIYBuilds For Business Inquiries: [email protected] Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Views: 18655 Brandon Lund